How Can We Help?

WARNING: Unplug the unit from its power source before performing any maintenance. If the power cord is difficult to reach, shut off the power breaker that provides power to the dehumidifier.

DH75 & DH100

1. Using a Phillips-head screwdriver, locate and unscrew the screw at the top of the filter door (nearest the control panel) by a quarter turn. Remove the door and the filter.
2. Simply slide the new MERV 11 filter in, with the air flow indicator arrows pointing towards the unit.
3. When your dehumidifier is new, you will want to check the filter every month. Depending on the environmental conditions, your filter may require more frequent replacement.

Click Here to watch a maintenance video demonstration. (You will be taken to a partner site.)

DH70 & DH95

Click Here to watch a video demonstration on changing the filter in your DH70 or DH100 dehunmidifier. (You will be taken to a partner site.)

Click here to complete our new product warranty registration online.

(Click on the filter description to purchase online.)

DH75: GFI #7143 Part 300-1090
DH100: GFI #7144 Part 600-1090
DH70: GFI #7133 Part 100-1090
DH95: GFI #7134 Part 200-1090

Click here for our DH75 & DH100 Wi-Fi & Touch Screen Dehumidifier Spec Sheet
Click here for our DH70 & DH95 Dehumidifier Spec Sheet

Yes. Click here to purchase online.

No. The MERV 11 filter is essential to provide protection of the internal components. Running a dehumidifier without a filter voids the warranty.

If you are a home owner, we recommend you purchase through a qualified contractor to install your dehumidifier professionally.

Click here to find a contractor. If one is not listed for your zip code, click here to find a wholesaler that may be able to recommend one for you.

We do not endorse any individual contractor, but you may search for a local contractor by clicking here, or contact a local wholesaler to request a referral by clicking here. You might also inquire through your neighborhood network for a referral.

Click here to shop online, or contact a local contractor or wholesaler for replacement parts. All maintenance and repair should be conducted by a qualified contractor.

Yes. Each unit includes two collars for duct installation.

Please refer to your wiring diagram, denoting the use of the D1, D2 connections.

Yes. Please refer to the wiring instructions that accompany your Nest controller.

1. Check the filter and change if dirty.
2. Check possible airflow blockage.
3. If neither of the above fix the issue, call Technical Support (866) 476-5101